Flotation Machine KYF Series In Mining Equipment-Hot Sale

Stirred Flotation Machine 1.Low energy consumption 2.We are direct manufacturer 3.Stable,high efficiency 4.ISO certified

The  Stirred Flotation Machine Application:

The flotation machine is the "u" groove, hollow shaft inflation and suspension of the stator, especially with a new impeller, which is one kind of leaf backward at an angle conical impeller similar to high specificspeed centrifugal pump wheel, Yang sent slurry volume, pressure head, low power consumption and simple structure. The impeller chamber fitted with a porous cylindrical air distributor, so that air can be pre-dispersed in most regions of the impeller blades provide a large pulp - Air Corners interface. In the flotation machine work, with the rotation of the impeller, tank pulp from four weeks by the bottom impeller the bottom to breathe between the impeller blades at the same time, low-pressure air into the blower to the air through the hollow shaft and impeller distributor which also entered. Pulp and air mixing between the leaves from the upper half of the surrounding syncline in the impeller on the launch, by the stator steady flow and directed into the whole trough. The bubbles rise to the stable region of the bubble, after the enrichment process, the bubbles from the overflow weir gravity overflow into the foam slot, as well as part of the pulp to go to the lower part of the flow of impeller, impeller mixing, remixing the formation of mineralized bubbles remaining slurry flows the next slot, until eventually become the tailings

The Stirred Flotation Machine Features:

The device of the structure of the flotation machine: This machine is mainly composed of the order of the trough, mixing equipment, inflatable devices, and expel the composition of the mineralization bubble devices, motors. 

The STirred Flotation Machine Working Principle:

Ground ore in the ground or ground, plus tune into the slurry stirred tank of water and necessary by the pharmaceutical, injected to start mixing the slurry tank, to the pulp into the air, making the formation of large bubbles, some can not easily be watermoist, commonly referred to as hydrophobic mineral particles attached to bubbles, with bubbles floating to the slurry surface, the formation of mineralized bubbles layer, others are easily wet by water, that is generally referred to as hydrophilic mineral particlesattached to the bubbles remain in the pulp, which will contain specific minerals mineralized bubbles discharged, so as to achieve beneficiation purposes

MODLE		KYF-1	KYF-2	KYF-3	KYF-4	KYF-8	KYF-16	KYF-24	KYF-38
SIZE	Length	1000	1300	1600	1800	2200	2800	3100	3600
	WIDETH(MM)	1000	1300	1600	1800	2200	2800	3100	3600
	HIGHTH(MM)	1100	1250	1400	1500	1950	2400	2900	3400
Single-effect volume(KG)		826.31	1419	1885	2206	3600	5900	7500	10300
Effective volume(M3/min)		1	2	3	4	8	16	24	38
CAPACITY/min)		0.2-1	0.4-2	0.6-3	1.2-4	3—8	4—16	4—24	10—38
Spindle motor	MODLE	Y132M1-6	Y160M2-8	Y160L-8	Y180L-8	Y200L-8	Y250M-8	Y250M-8	Y280S-8
	POWER(kw)	4	5.5	7.5	11	15	30	30	37
	SPEED(r/min)	960	720	720	970	730	730	730	740
IImpeller	Diamete(mm)	340	410	480	550	630	740	800	880
	HIGHTH(mm)	215	256	300	340	390	460	—	545
	SPEED(r/min)	281	247	219	200	175	160	150	138
	Peripheral speed(m/s)	5	5.3	5.5	5.76	5.77	6.7	6.25	6.36
Scraper motor	MODLE	Y90S-4	Y90S-4	Y90L-4	Y90L-4	Y90L-4	Y90L-4	Y90L-4	Y90L-4
	POWER(kw)	1.1	1.1	1.5	1.5	1.5	1.5	1.5	1.5
	SPEED(r/min)	1400	1400	1400	1400	1400	1400	1400	1400
Scraper	SPEED(r/min)	18	18	16	16	16	16	16	16
	Diameter(mm)	500	500	580	600	600	700	700	500
Pressure(kpa)		≥12.6	≥14.7	≥19.8	≥19.8	≥21.6	≥25.5	≥30.4	≥34.3
Maximum inflation(m³/m2·min)		2	2	2	2	2	2	2	2

Flotation Machine KYF Series In Mining Equipment-Hot Sale